Kicker ZKICK ZK500 Manuel d'utilisateur télécharger pdf (Page 3)

UsingtheRemoteControl

The Infrared Remote Control enables you to control your Zune device and access the ZK500 System

Menu from a convenient location. With the fully featured remote control it is easy to access all of your

Zune device’s music and/or video content.

4 5

PERFORMANCE

UsingtheSystemMenuRotaryControl

The ZK500 Stereo System’s rotary control provides an intuitive user interface. The System Menu

options listed on the LCD display below are available for adjustment by the rotary control. The rotary

control knob is used as a push-button to power on the ZK500 and to scroll through the menus

available on the LCD screen. Turning the rotary control knob allows you

to adjust the parameters of the

selected menu.

After plugging the power supply into the DC input on the back of the ZK500, the unit will be in

“Standby” mode, as displayed by the LCD screen on

the System Menu. Turn the power on by pushing

the rotary control button once. When the power is on, both the “Kicker” logo and “Vol” will be displayed

on the System Menu.

Volume: By de

fault, the ZK500 will be in volume control mode and “Vol” will be displayed on the LCD

screen. Turn the rotary knob to adjust the volume up or down. The rotary control will automatically

revert to volume control mode after a short time period if any other menus have been selected.

To scroll through the other menus, simply use the rotary control as a

push-button. Each single button

push will take you from one menu to the next, rotating through Treb>Bass>Aux-In>Vol and back to the

“Treb” treble control.

Treble: To adjust the treble on the ZK500, use

the rotary control as a push-button to scroll through the

menus until the “Treb” menu is displayed on the LCD screen. Turn the rotary control knob clockwise to

increase tre

ble and counter-clockwise to reduce treble.

Bass: To adjust the bass level on the ZK500, use the rotary control as a push-button to scroll through

the menus until the “Bass” menu

is displayed on the LCD screen. Turn the rotary control knob

clockwise to increase bass and counterclockwise to reduce bass.

Auxiliary Input: To enable the auxiliary input on the ZK500, an external devic

e must be plugged into the

1/8” stereo auxiliary input on the back of the unit. Use the rotary control as a push-button and scroll

through the menus until “Aux-In” is displayed. Turn th

e rotary control clockwise to enable the auxiliary

input. When the auxiliary is enabled, the system menu will display “ON”. Turn the rotary control counter-

clockwise to disable the auxiliary inpu

t and return to Zune device mode. When the auxiliary input is

disabled, the system menu will display “--”.

Standby: In “Standby” mode, the ZK500 will be powered down, but your docked Zune device will

continue to charge

as long as a power source is plugged into the DC input on the back of the ZK500.

To enter standby mode simply press and hold the rotary control button until the unit turns off and

“Standby” is displayed.

OPERATION

Model:

Speaker Design

Woofer Size, in (mm)

Tweeter Size, in (mm)

Tweeter Design

Passive Radiator Size, in (mm)

RMS Power, Watts @ 1% Total Harmonic Distortion

Effective Frequency Range, Hz

Power Supply, Volts (Ampere)

Height, in (mm)

Width,

in (mm)

Depth, in (mm)

Weight, lb (kg)

Performance

ZK500

2 - Way

5 (127)

3/4 (20)

Silk Dome

6 X 6 (152 X 152)

2 X 20

50 - 20k

22 (2.7)

8.5 (216)

19.2 (488)

8.4 (214)

9.2 (4.2)

ZK500STEREOSYSTEM

Treb

Bass

Vol

Aux-In

Standby

ConnectingExternalDevices

To connect an external video display to the ZK500, make sure the video output is enabled on your Zune

device. Enabling the video out on your Zune device may require a firm

ware upgrade. Check for software

updates from the help menu of your Zune software with your device connected to your computer’s USB

port. To enable the video output, on the Zune device’s main menu, select settings>display>tv out. Turn

the tv out setting to on. Connect a standard RCA composite video cable from the composite video

output on the back of the ZK500 to the RCA video input on your external video display. See Figure 3.

This is a pass-through connection. If there are any problems with your external video display, refer to

the Zune device manual or the instructions packaged with you

r external video display. The 4 and 8 GB

Zune digital media players will not output video through the ZK500.

To connect an external audio device to the ZK500, enable Aux-In mode with the rotary control as

previously described. Connect your line level device to the 1/8” stereo input on the back of the ZK500

with the included auxiliary cable. See Figure 2. If the sound is distorted, you may be overdriving the

auxiliary input. Try turning down the external device until the sound is no longer distorted.

Use the push-button selector

to turn on the ZK500 and

make menu selections.

Turn the rotary control to

adjust system menu

parameters.

ZK500

System Menu

Skip Forward

Hold down to Fast Forward

Skip Backward

Hold down to Rewind

Volume Up

Mute ZK500 Output.

Play/Pause

Figure 4

Navigate to next Zune

Device menu directory

Navigate to previous Zune

device menu directory

Navigate within ZK500 System

Menu. Treble>Bass>Aux-in

Make selections and enter sub-

directories within Zune device

Navigate toward Zune

device root directory

Hold down to enter

ZK500 System Menu

Increase values within

ZK500 System Menu

Navigate upward through

Zune device menu directory

Press up arrow while in Aux-In

Menu to enable Aux-Input

Figure 5

Volume Down

Reduce values within

ZK500 System Menu

Navigate downward through

Zune device menu directory

Press down arrow while in Aux-In

Menu to disable Aux-Input

Hold down to turn the

ZK500 on/off

Use enter button to exit the

ZK500 System Menu.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Kicker ZKICK ZK500 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Microphones Kicker ZKICK ZK500