Kicker ZKICK ZK500 Manuel d'utilisateur télécharger pdf (Page 2)

DockingYourZuneDevice

1. Choose the dock adapter that best fits your Zune

device. See the table below.

2. Attach the adapter to the ZK500’s docking bay.

3. Connect your Zune device to the ZK500’s dock

conne

ctor.

4. Plug the power cable into the DC input on the

back of the ZK500.

5. Plug the 2-prong electrical plug into a surge

protected electrical outlet.

The Kicker zKICK ZK500 Stereo System for Zune is designed for livin’ loud with your Zune device in

the home environment. The ZK500 is fully featured with dual full-range 5” (`127mm) Kicker drivers and

3/4” (20mm) silk dome tweeters driven by a powerful amplifier with digital signal processing. The 6”

(152mm) square passive radiator (subwoofer) on the back of the ZK500 balances the sonic output,

adding the punchy low-frequency response

that put Kicker subwoofers on the map. The rotary control

and infrared remote allow simple, streamlined control of your ZK500 Stereo System. The ZK500 can be

used with any existing Zune device. In additio

n, the ZK500 boasts a wide range of connectivity options

including a composite video output, stereo RCA outputs, and an 1/8” stereo auxiliary input for

incorporating additional audio/video devices with your ZK500 Stereo S

ystem.

INSTALLATION

Congratulations on your

KICKER purchase

Please record your purchase

information and keep your sales

receipt for validation of warranty.

Authorized Kicker Dealer:

Purchase Date:

Model Number:

_________________________

INSTALLATION

DigitalStereoSystem

forZune

Owner’sManual

Model:

ZK500STEREOSYSTEM

ZK500

Figure 2

Rotary

Control

LCD

Display

5” (127mm)

Full-Range

Drivers

3/4” (20mm)

Silk Dome

Tweeters

IR Remote

Receiver

Docking

Bay

Transport

Handle

Square

Passive

Radiator

Composite

Video Out

1/8” Stereo

Auxiliary Input

Stereo RCA

Output

L R DC Power

22 Volts

Figure 3

ImportantSafetyInstructions

Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent

damage to your self, your Kicker product, or your portable entertainment devic

The ZK500 should not be used near water or in an environment where exposure to liquids is possible. This includes but

is not exclusive to areas where splashing, dripping

, leaks, spills, and exposure to rain can occur. Liquid containers should

not be placed on or near the ZK500 Stereo System. The ZK500 Stereo System should not be cleaned with liquid

cleaners. Use only a dr

y cloth to clean the ZK500. Only use the ZK500 in areas with adequate open ventilation allowing

at least 4” of space on all sides of the ZK500. Do not set the ZK500 on any surface or cover t

he ZK500 with any object

that could impede the airflow to and from the ZK500 Stereo System. The ZK500 should not be placed near any source

of heat. This includes but is not limite

d to stoves, radiators, heating elements, electronic heat sources, and areas where

excessive solar heat can be generated. Do not install the ZK500 near any flame or place any flammable objects near t

device. The power outlet used to provide power to the ZK500 should be accessible at all times. The polarized 2-prong

electrical plug has a wide blade and narrow blade that

should fit into the corresponding wide and narrow receiving

connections of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does

not fit,

consult with an electrician to upgrade the electrical outlet accordingly. T he power cord should be situated in a way that

protects it from being pinched, walked on, tripped over, or

accidentally pulled from the electrical outlet or the electrical

input on the ZK500. Do not run the cable through doorways or underneath objects that could damage the wire or

tear

the insulating material surrounding the wire. Only use the manufacturer supplied power supply with the ZK500. We

recommend using a surge protector/power conditioner and unplugging the ZK500

during any electrical storms or

situations that could cause voltage fluctuations in the electrical system.

Figure 1

The Zune Device should be mounted on the docking bay before

connecting any power cables to the Kicker Stereo System.

ZK500DockAdapter ZuneDeviceModel

1. A Zune 30 Gb Digital Media Player

2. B Zune 80 Gb Digital Media Player

3. C Zune 4, 8 Gb Digital Media Player

Visit www.soundgate.com to learn more about

Soundgate products designed for enjoying your Zune

device in the mobile environment. Soundgate

products offer a wide range of options for connecting

your Zune device to your f

actory car stereo system.

Skid Resistant/Non-Marking Feet

Serial Number:

_________________________

Note: The ZK500 is compatible with Zune Firmware Version 1.4 and beyond. Before docking your Zune device to the ZK500 Stereo

System, update to the latest Zune firmware by syncing your Zune device to your Zune software and checking for the most recent updates.

Note: To prevent vibration during playback, use the

enclosed vibration isotation pad as shown in Fig. 2.

Vibration

Isolation

Pad

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Kicker ZKICK ZK500 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Microphones Kicker ZKICK ZK500