Kicker S18X Manuel du propriétaire télécharger pdf (Page 8)

SoloX Subwoofer

Mounting

Now that you have opened the box and read “The

Adventures of Sam Stikman” and decided on which enclosure

design to use, you may now remove the SoloX from it’s box.

Please follow the instructions

lined out here to insure proper

installation.

1. With assistance from a

friend remove the SoloX from

the cardboard facilitation cham-

ber.

2. Once out of the carton remove

the (4) four acorn head nuts and

(8) eight bolts securing the SPAIR

to the BAM and wood baffle

assembly. Place SPAIR in safe

clean location!

ATTENTION!

3. Install the Gap Cap into the

BAM around the pole-piece to

protect the motor assembly

from debris while you are

installing the woofer. If any

metal shavings were to fall into

the gap, they would be impossi-

ble to remove! Please use the

Gap Cap!

4. With the Gap Cap now

installed remove the (4) double

end threaded studs that lock the

BAM to the wood baffle assem-

bly.

The SPLAT and wood baffle will

now come free from the BAM.

The baffle will now become your

mounting template.

5. Place the wood template on

your enclosure baffle to mark

the holes for mounting.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Kicker S18X Manuel du propriétaire Page 8